D-Touch 20

Digital Mixing Console

The D-touch 20 is the best choice in portable digital cols for its large 7 "display that allows absolute control of all its functions through it.

FEATURES

• 9 MOTORIZED FADERS 100mm
• WIFI INCLUDED
• 20-INPUT / 16-BUS / 8 OUTS
• 8 INTERNAL EFFECT MODULES
• TWO USB 2.0 TOUCH SCREEN BUILT IN 7"
• 3 YEARS WARRANTY



TECHNICAL SPECIFICATIONS

. 12 mic input with Purity Preamps and +48V Phantom Power
. 2 Stereo TRS input . S/PDIF I/O - AES/EBU output
. USB Stereo Input / USB Stereo Recording
. Digital Gain. Total Recall
. High QuaLiy Professional Neutrik® Connectors
. 16 buses . 8 assignable XLR output connectors
. Stereo monitor output connector / Headphone output
. AD/DA up to 192kHz
. 7” 1024px IPS Touchscreen
. Screen adjustabLe angle / Capacitive display
. TotaL Lock Security Function
. 9 Motorized faders 100mm / Send on Fader
. 10 Digital Vumeter
. 8 internal effect modules Modulation/Delay/Reverb/Graphic EQ
. Phase Inverter/Input Delay
. Compressor/Side Chain/Gate/Full—Parametric EQ
. Wifi USB / iPad remote control

CHARACTERISTICS

The D-TOUCH 20 is optimized in all aspects, designed for the most demanding sound engineer

TOTAL RECALL

Purity PreAmps™ Digital Gain. No need recall sheet. Turn on the audio console and start mixing.

NEUTRIK

Neutrik® is the leading supplier of professional entertainment connector products like audio, video, fiber optic and industrial connectors and interconnect systems.

ENCODER

Parameter adjustment high precision backlit Encoder. Press for a precise fit. 1 knob, total control.

LAYER SELECT and SENDS

Select either channels 1-8 inputs, 19-20 inputs or 1-8 buses. Control the levels with 9 motorized faders. Send on faders function: Quickly assign any channel to all buses

10 DIGITAL VUMETERS

8 segment led display for total control of all inputs levels and extended 16 segment display for master output. Precision in every mix detail.

XLR, TRS and COMBO INPUTS

8 XLR, 4 TRS and 4 Combo inputs povides compatibility with all posible conexions. Designed for applications in stages, shows and more...

DISPLAY CHARACTERISTICS

7” Touch screen built in




INTERNAL FX MODULES

Up to 8 effect modules Modulations, reverbs, delays and graphic EQ.

PATCH

Full-configurable and customized patch way for any situation.

BUSES

Route the signals wherever you need with 4 mono / 4 stereo Buses and 4 digital buses.

DYNAMIC PROCESSORS

Full-configurable Compressor and Gate. All analog inputs with dynamic prossesors.

ECUALIZER

With 4-band parametric EQ. Full control of the frequency spectrum in each channel and output.

SENDS

Up to 8 auxiliary sends, quickly and easily assignable.


192kHz Digital Converter

• Great performance
• Ultra-fast processing time
• AD/DA with wide dynamic range
• Ultra-low output distortion

8 assignable XLR balanced outputs

D-Touch 20 offers 16 internal buses that can be patched to the physical XLR, S/PDIF and AES/EBU.

• Without electrical noise
• Flat frequency response
• Ultra low harmonic distortion.

LAYER SELECT

Select either channels 1-8 inputs, 19-20 inputs or 1-8 buses. Control the levels with the 9 motorized faders.

SENDS ON FADERS

Touch and slide. Quickly send any channel to all the busses you need. Use the faders to adjust the send levels.

SKP D-Touch Software Update V1.5.4

• Modulation, Reverb and Delay libraries.
• Custom Channel and Bus names are displayed in sends section.
• Assigned colours to Channels and Busses.
• 31 bands GEQ.
• Measurement RTA function.
• Sends on faders function optimized.
• Compatible with .ogg, .flac and .ape files.

Download

5 - Repeat the process if it fails.

According to the previous firmware version it is possible that the process must be done several times since the update is incremental.

WIFI INCLUDED

Use your personal iPad to control all D-Touch 20 functions remotely.

© Copyright 2018 SKP Pro Audio - All rights reserved.